219 useful answers · Page 6 of 10
Choose a sensible routine for the materials and appliances in your home.
Search this topicNo. Nutribullet’s extractor-blade gasket is intended to stay seated. Clean around it with warm soapy water and a suitable dish brush, taking care around the sharp blades. Pulling it out can stretch or damage it. If it loosens or falls out, the manufacturer recommends replacing the compatible blade assembly instead of fitting an aftermarket loose seal.
Nutribullet recommends hand washing the extractor blade with warm soapy water and a dish brush. Dishwasher heat can affect the gasket and allow it to loosen. Rinse carefully and dry the assembly after washing, keeping fingers clear of cutting edges. Follow the instructions for your exact blender model, since cups and blade assemblies can have different care requirements.
Remove the mop head from its frame and follow the care label. O-Cedar’s spin-mop washing guide allows a machine wash up to 86°F with similar textiles and without fabric softener. Let the head dry flat completely before using or storing it. Avoid assuming a hotter wash or tumble dryer is suitable just because the head is reusable.
No. O-Cedar identifies EasyWring and RinseClean as different refill systems, even though their triangular heads look similar. Match the replacement label to the name of your mop system before buying or forcing it onto the frame. H2prO flat-mop refills also need the appropriate system. The word microfiber describes the cleaning material, not a universal connector.
Set the mop head in the bucket’s wringer and hold the handle loosely so it can rotate. Pump the foot pedal to remove excess water; O-Cedar suggests about five to seven presses as a starting point. Check the moisture against your floor’s care requirements. Begin at the far side of the room so you can finish near the exit.
After mopping, drain and rinse the clean-water tank with water. Leave the blue fill cap and red flow valve open so the tank can air-dry instead of sealing moisture inside. Clean and dry the mop head separately. Check the system instructions before adding a cleaner to the tank; more concentrated solution is not automatically better.
Vitamix recommends starting with a soak: add one cup of white vinegar, then warm water to about halfway, and leave it for several hours. Empty it, gently clean with a soft sponge and rinse, keeping hands clear of the blades. Follow with the normal soap-and-water cleaning cycle. Film may improve; permanent scratches will not dissolve away.
Rinse promptly, fill the container about halfway with warm water and add a few drops of dish soap. Secure the lid and use the model’s cleaning program or the manufacturer’s stated high-speed cleaning method, then rinse thoroughly and air-dry. Clean the lid and other accessories separately as directed. The motor base must never be submerged.
For models covered by KitchenAid’s 9-cup care guide, removable parts are top-rack dishwasher safe. Keep the bowl upright rather than on its side and choose a gentle, non-high-temperature cycle. Dry everything afterward. Check your model’s manual before applying that guidance to a different processor, and remember that the electrical motor base never belongs in the dishwasher.
Switch it off and unplug it first. Wipe the base and cord with a warm, damp cloth, then wipe clean and dry with a soft cloth. Do not immerse the base or rinse it under the tap, and avoid abrasive cleaners. Remove and wash the bowl and cutting attachments separately according to the model’s care instructions.
Unplug it and let it cool completely. Remove the crumb tray, racks and other removable accessories, then clean them as directed. Apply a non-abrasive liquid cleanser to a soft damp cloth, not directly to the oven, and gently wipe the interior walls. Avoid the heating elements with cleaner, and dry everything before reassembling and reconnecting power.
No. Breville warns against cleaning agents, baking-soda paste and standard oven cleaners on its quartz heating elements. With power unplugged and the oven fully cool, its care guide permits a very gentle wipe along the element with a soft damp cloth. Let it dry completely before use, and check your specific model’s instructions before touching the element.
Disconnect power before removing the baffle or cleaning around the opening. For InSinkErator models with the removable baffle described in its care guide, lift it out and wash it by hand or in the dishwasher as directed. Clean the underside where food residue collects, then reinstall it securely. Never run the disposal without its required baffle in place.
Check the bath maker’s approved cleaner list and use a soft, damp cloth or sponge. Kohler advises testing an unfamiliar surface out of sight first and avoiding abrasive brushes or scouring pads. Work gently rather than trying to scrub a mark away with force. Rinse and dry as the product directions require; a persistent mark may need manufacturer advice.
Wipe the bath after use with a soft cloth or suitable squeegee so water and soap residue do not repeatedly dry on the surface. This complements periodic cleaning with a product approved for that acrylic finish. Keep abrasive pads and stiff brushes away. A whirlpool’s internal piping needs its own care procedure in addition to wiping the visible shell.
For routine care, Delta recommends mild detergent and warm water applied with a non-abrasive cloth or sponge, followed by a thorough rinse. Check both the glass-coating and metal-finish restrictions before using a commercial cleaner. Test it discreetly first. Some household glass cleaners contain ingredients Delta excludes, so familiar branding alone does not establish compatibility.
Affiliate disclosure: We may earn a commission when you buy through these Lowe’s links. How our links work.
Check Lowe’s for current price, availability and specifications.
Avoid it. Delta warns that steel wool and aggressive scrub brushes can damage its Spot Guard coating and scratch the glass. Start with the approved mild cleaning method and a soft cloth instead. If deposits remain, ask the door manufacturer for a compatible treatment rather than escalating to an abrasive pad intended for a different surface.
Apply an approved cleaner to the cloth instead, then wipe the mirror while keeping liquid away from its edges and backing. Dry water droplets promptly. Kohler notes that moisture, ammonia and vinegar-based cleaners can accelerate damage to the reflective backing. Follow the mirror maker’s care instructions rather than assuming every window-cleaning product suits a mirror.
Affiliate disclosure: We may earn a commission when you buy through these Lowe’s links. How our links work.
Check Lowe’s for current price, availability and specifications.
They may be desilvering: damage to the reflective backing rather than dirt on the front glass. More scrubbing or stronger cleaner will not restore missing backing. Keep the edges dry and contact a glass professional about repair or replacement if needed. A spot on the surface can be cleaned, but a damaged reflective layer needs a different solution.
Yes. Include the rack, drainboard and drying mat in your kitchen cleaning routine. Empty them, remove debris and clean each material by its maker’s method; some parts are dishwasher safe while others need hand cleaning. Rinse where appropriate and let everything dry before reassembly. Do not assume a metal rack and its plastic tray have identical care instructions.
Unplug the dock and wait sixty seconds. For models covered by iRobot’s standard Home Base instructions, wipe the robot and dock contacts with a lightly damp cloth, then check for damage. Green or copper-colored contacts need support attention. Essential 2 and newer series have separate procedures, so confirm your model first.
No. iRobot specifies a clean, dry microfiber or soft cotton cloth for the Home Base sensor window. The cleaning method for metal charging contacts is different from the method for optical windows. Unplug the dock before maintenance, and avoid spraying liquid into sensors or their openings.
Affiliate disclosure: We may earn a commission when you buy through these Lowe’s links. How our links work.
Check Lowe’s for current price, availability and specifications.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. How our links work.
Remove accumulated residue with a wet cloth or rinse the removable tray in the sink. Dry it thoroughly with a soft cloth before putting it back. iRobot says this tray is not dishwasher safe. Clean the detached tray rather than rinsing the powered dock or the robot itself.
Yes. iRobot includes a moved, rotated, or unplugged dock among the checks for docking Error 18. Leave the base in its established position during a mission and keep its approach clear. If you need to relocate it, finish the current run first and follow the mapping instructions for your model.
Source checks for these answers: September 22, 2026. Product instructions and local requirements can vary.